RJH FORD FOCUS MK4 DOOR SILL LIGHTS & FOOTWELL LIGHTING
£60.00
If your looking for something different to brighten up your car, these are the thing for you
- Easy modification
- Fit all models with footwell lights PLUG & PLAY
- Sill lights work on a sequence
- They will be activated same as your footwells
Whats in the box
2 x disco edition door sills
2 x footwell panels
2 x harness cable
ADD ON OPTION
REAR FOOTWELL LIGHTS (PLUG & PLAY)
DUAL BOOT LIGHTS
The Disco Pulse Line Edition are a limited edition exclusive that will be a limited quantity
Fitting guide
1 Prepare/remove the door sill area
1 Prepare/remove the door sill area
If you already have door sills attached, simply pry off with gentle force and wipe down with a damp cloth to remove off all dirt and dry.
2 Removing the rubber door seal
Simply pull the rubber seal off which surrounds your door edge
Simply pull the rubber seal off which surrounds your door edge
3 Removing the plastic base trim
using your hands pull the plastic base off which is held with yellow clips (dont worry about breaking, it will pop off with some force). The corner trim is held in with a single screw, remove the screw and pull to remove trim
using your hands pull the plastic base off which is held with yellow clips (dont worry about breaking, it will pop off with some force). The corner trim is held in with a single screw, remove the screw and pull to remove trim
4 Wiring in your door sill light
Find your footwell bulb and Disconnect, Now plug in your new adapter
Find your footwell bulb and Disconnect, Now plug in your new adapter
5 Sill fitting
remove the 3m tape backing on your door sill light and fit in to your desired location.
6 Nearly finished
now hide the wires and fit all your trim back into place
now hide the wires and fit all your trim back into place
7 NOW FINISHED, JOB WELL DONE
Now remove the protective film
Now remove the protective film
Ratings & Reviews
-
Be the first to review this product.
Write a review